HIRL trailed mixer-wagon T Vertikal XL - with two augers

The trailed HIRL mixer wagon T Vertikal XL with two auger comes with a capacity from 12 till 18 m³. The following types are available:

  • Mixer wagon T 1200 VXL
  • Mixer wagon T 1400 VXL
  • Mixer wagon T 1600 VXL
  • Mixer wagon T 1800 VXL
The trailed HIRL mixer wagon T Vertikal XL with two auger comes with a capacity from 12 till 18 m³.

Rugged, efficient and built to last!

The rigid mixing-tank is completely made out of S355 steel. For the tank floor 20 mm thick steel is used, the side walls are 8 mm thick and a conical tank cover ring stiffens the tank additionally.

Also the massive, 15 mm thick auger made out of S355 steel with at least 2.5 windings upwards and a Hardox cutter edge at the beginning of the auger are made to last. An upright final blade at the end of the spiral and saw tooth blades on the auger ensure a complete and effective dissolving of the silage-bales.

The rigid mixing-tank is completely made out of S355 steel.
The Hirl Trailer T Vertikal XL with two augers and single axle

The two-auger vertical-mixer HIRL T Vertikal L - standard equipment

  • Mixing-tank with a conical tank cover ring made out of S355 steel
  • Optional with intermediate-flange making capacity-upgrades afterwards possible
  • Tank Base plate 20 mm thick
  • Side panel 8 mm thick
  • Mixing auger 15 mm strong made out of S355 steel
  • Auger equipped with cutting blades
  • Two mechanic counter blades
  • Planetary reducing gear with a ratio of Ieff = 18.3
  • Two gear transmission
  • Height adjustable drawbar, can be mounted in low and high position
  • Norm flange on drawbar (As standard with drawbar eye, optional Scharmüller K80 available)
  • Tyres 435/50 - 19.5 remoulded
  • Robust frame with double steel tubing
  • 4 mounting points for weighing bars
  • Discharge at front with chain conveyor or optionally with two direct discharges
  • Ascension ladder with overview-platform
  • Support foot with mechanical fast locking mechanism
  • Bowden cable remote control with 3.0 m long cabel, mounting plate with two powerful magnets
  • Extern oil supply from the tractor necessary (1 x one way control unit with return flow)
  • Zone-hardened blades
The Hirl Trailer T Vertikal XL can be extensively individualised.

The following equipment is optionally available

  • Austragsteppich hinten (Kette)
  • Austragsteppich vorne (Kette)
  • Special-spring-steel blades with wolfram-carbide coating
  • On-board hydraulics
  • Parking brake with hydraulic spring reservoirs (brake-pads 350 x 80 mm, one cylinder)
  • Two litre pneumatic braking system (brake-pads 350 x 80 mm - with wheel chocks and spherical brake (for TÜV-certification)
  • Hydraulical support foot (simple version, control unit on tractor necessary
  • Three-chamber rear light complying with traffic regulations
  • TÜV - certification with operating licence for up to 25 km/h
Solid planetary transmission for up to 60 000 Nm torque output

Planetary Transmission

Solid planetary gearing (up to 60000 Nm of torque)

Special-spring-steel blades with wolfram-carbide coating on request

High performance blades

Special-spring-steel blades with wolfram-carbide coating on request

Optimized vertical auger

Optimized vertical auger

Models with 10 m³ upwards come with 2.5 spiral-windings or more

Programmable weighing computer PTM Graphic

PTM Graphic

Programmable weighing computer with:

  • 4 weighing bars lengthways mounted - 54 mm diameter
  • 15 recipes, 15 ingredients
  • Recipes and ingredients shown with name
  • Options of programming the overall weight or per cattle
  • consumption display
  • Big, illuminated display
  • Logical menu navigation
  • Optional with remote-control
Weighing computer PTM FC 20

PTM FC 20

Programmable weighing computer

  • 4 weighing bars lengthways mounted - 54 mm diameter
  • Big, easy to read, red letters
  • Partial weight
  • Overall weight
  • Zero position through calibrating
Weighing computer PTM Graphic Memory, supports data-transfer to PCs

PTM Graphic Memory

Weighing unit for the data-transfer to PCs:

  • 4 weighing bars lengthways mounted - 54 mm diameter
  • 80 recipes, 20 ingredients
  • Data-transfer to PC possible
Power take-off drive shafts: Various different versions available

Power take-off drive shaft

  • Cardan shaft normal (Walterscheid type W2400)
  • Cardan shaft normal (Walterscheid type W2500)
  • Cardan shaft with one-sided wide angle (Walterscheid type W2400)
  • Cardan shaft with one-sided wide angle (Walterscheid type W2500)
  • Cardan shaft with both-sided wide angle (Walterscheid type W2400)
  • Cardan shaft with both-sided wide angle (Walterscheid type W2500)

Technical Spec - Weight and Dimensions

* depending on set of tyres

** deviating design on request realizable

*** depending on chosen equipment

Effective June 20th 2014. Technical changes reserved

Type Capacity Length Width Maximum height* ** Curb-weight*** Attachment-height of drawbar Discharge height* (of conveyor) Power take-off shaft Permissible towing capacity Load on drawbar